| 8 Units Quantity Exported | 10 Toneladas Capacidad de elevación | A3 / A5 Clase de servicio | Chile Destino |
In 2026, our team successfully completed the export of 8 units of 10 ton puente grúa monorraíl to a steel structure fabrication workshop in Chile. This project demonstrates our capability as an ISO-certified, factory-direct crane manufacturer providing complete turnkey crane solutions to demanding industrial environments worldwide.
The Chilean client operates a large-scale steel structure fabrication plant producing H-beams, columns, and welded frames for the construction sector. Their production floor spans over 12,000 m². They required a reliable, high-efficiency workshop material handling crane system to replace forklift-based operations.
This export case covers the design, manufacturing, pre-shipment inspection, international shipping,
and commissioning guidance for 8 units of EOT crane 10 ton (Electric Overhead Travelling Crane),
configured specifically for a steel structure workshop in Santiago, Chile.
Every unit was engineered to the client’s workshop layout and heavy-duty crane for metal fabrication workshop requirements. Full technical specifications per unit:
| Parámetro | Especificación |
| Tipo de grúa | Single Girder EOT Overhead Crane (Bridge Crane) |
| Capacidad de elevación | 10 Ton (10,000 kg) |
| Span | 18 m – 24 m (customized per bay) |
| Altura de elevación | 6 m – 12 m (per workshop column height) |
| Clase de servicio | A3 / A5 (ISO 4301, FEM 1.001) |
| Tipo de grúa | CD1/MD1 Electric Wire Rope Hoist |
| Velocidad de elevación | 8 m/min (main) / 0.8 m/min (micro) |
| Velocidad de desplazamiento de la grúa | 20 m/min |
| Velocidad del tranvía | 20 m/min |
| Control System | Pendant Control + Wireless Remote Control |
| Fuente de alimentación | 380V / 50Hz / 3-Phase (adjustable) |
| Main Girder Material | Q355B High-Strength Structural Steel |
| End Truck Wheels | Hardened Forged Steel, 4-Wheel Design |
| Electrification | Festoon Cable System (crane & trolley) |
| Dispositivos de seguridad | Overload limiter, limit switches, emergency stop, anti-collision |
| Estándar de diseño | GB/T 3811, FEM, ISO, CE available |
| Surface Treatment | Shot blasting Sa2.5 + Epoxy primer + Topcoat |
The single girder overhead crane was selected for the following key reasons:
“For 10-ton or below applications in a workshop material handling environment with moderate duty cycles, a well-engineered single girder EOT crane delivers the optimal balance of performance, reliability, and total cost of ownership.”
Correct selection of crane duty class A3/A5 (ISO 4301 / MEF 1.001) determines the structural fatigue life and component rating of every part of the bridge crane system. Two configurations were deployed:
Assigned to workshop bays performing light-to-moderate lifting cycles, primarily moving finished assemblies and storing raw material. Estimated 125,000–250,000 load cycles over design life.
Assigned to high-throughput fabrication bays operating across double-shift production. Suitable for 500,000+ load cycles. Reinforced end trucks, higher-grade gearboxes, and Class M5 wire rope hoists specified.
All 8 units were equipped with a dual-mode crane control system (pendant + remote), standard for modern workshop crane systems in dynamic fabrication environments.
IP65-rated pendant with 8-direction travel buttons, hoisting up/down, emergency stop, and horn. Fail-safe design ensures all movements halt on pendant disconnect. Cable length customized per workshop floor height.
2.4 GHz frequency-hopping radio remote, rechargeable battery, 100 m operating range. Allows operators to maintain safe distance from suspended loads during precision steel beam placement — critical in a steel structure workshop environment.
All units include: overload limiters (electronic load cell), upper/lower limit switches, end-of-travel buffer stops, phase-loss protection, and short-circuit breakers — fully compliant with international heavy-duty lifting solution safety standards.
As a full-service turnkey crane solution supplier, our export workflow followed a rigorous 5-stage process:
Competing in the crane supplier for Chile market demands more than price. The client evaluated five international bidders and selected us based on:
Following full installation across all 8 workshop bays, the Chilean client reported the following outcomes within the first 90 days:
Standard spans range from 7.5 m to 28.5 m. Custom spans are available with engineering review. For this Chile project, spans between 18 m and 24 m were utilized across 8 workshop bays.
A3 (M3/M4 in FEM terms) is suited for light-to-moderate use; A5 (M5/M6) is for continuous, intensive industrial operations. Correct duty class selection directly affects structural life, gearbox rating, and hoist classification.
Yes. All units can be configured for local supply voltage. Frequency converters, motor ratings, and transformer matching are handled during the electrical design phase.
Commercial invoice, packing list, bill of lading, certificate of origin, CE declaration, factory test report, load test certificate, and operation manuals. Spanish translations available on request.
We provide comprehensive remote commissioning support via video call with bilingual assembly drawings as standard. On-site engineer dispatch is available as an additional service.
Enviar solicitud
